Correct Functions of the MID Dipswitches

[NEAL SINGH]

These are the dip switches configs:

/* Pinout on Dip switch 2
   *  1 MSB UART2 Baudrate
   *  2 MID UART2 Baudrate
   *  3 LSB UART2 Baudrate
   *  4 Protocol Wrapped ON/OFF (Repeat to UART 2 the unwrapped data)
   *  5 LCD Keypad ON/OFF side 1
   *  6 LCD Keypad ON/OFF side 2
   *  7 Mech pump Enable
   *  8 Future
  */

/* Pinout on Dip switch 1
   *  1 MSB #ID
   *  2 MID MSB #ID
   *  3 MID LSB #ID
   *  4 LSB #ID
   *  5 The baudrate of UART 1 is copied from UART 2
   *  6 Auto clear protocol enable
   *  7-8 00 = Serial, 01 = RS485 and 10 = RF
  */

Regards

 

El mié., 6 nov. 2019 a las 8:37, Juanchi Garin (<[hidden email]>) escribió:

Hi Neal,

Ok, today after finish with PSU I will continue with the iButton and I will check that too.

 

Regards

 

 

El mié., 6 nov. 2019 a las 7:57, Neal Singh (<[hidden email]>) escribió:

Hi Juan

I looked at it this morning and I realized we had the Dipswitch wrong – this is correct;