MID Review: Stabilizing the Daughter boards and finding the screws to use

[NEAL SINGH]

Hi Eric,

We need to get 2mm screws to mount the daughter boards. There is also a possibility of using a  standoff as show in the picture.

I have not been able to find the screws and there is a suitable length of about 16mm required.

Also spacers – might also add stability.

 

Please investigate and report back on how best we go forward and whether the holes sizes needs to change.

 

Best Regards

Neal Singh

082 4593467

Ph: 011 615-3437

www.smartfuel.co.za