Master Controller: MAP#01/ PumpSetup Command 0x25 - Disable/Enable MID and Pumps via MID Physical# =0

[NEAL SINGH]

Subject: Master Controller: MAP#01/ PumpSetup Command 0x25 - Disable/Enable MID and Pumps

 

 

The MAP#01 design caters for two MIDs only and to Enable or Disable the MID all you need to do is use command 0x25 and set the MID Physcal # to zero and that will disable the Pumps and associated Tagging

 

15:38:49.748 -> Initializing MID objects interface....
15:38:49.748 -> MID SETUP -> Logical#: 0, MID#(ID): 1 = Enabled , Tagging#: 1 = Enabled, Pump#: 1, Nozzle#: 1, Tank#: 1, Price#: 14.61, ATG#: 1, Transactions:  Enabled
15:38:49.783 -> MID SETUP -> Logical#: 1, MID#(ID): 0 = Disabled , Tagging#: 2 = Enabled, Pump#: 2, Nozzle#: 2, Tank#: 2, Price#: 16.34, ATG#: 2, Transactions:  Enabled
15:38:49.783 -> Initializing MIDs interface....RS485