Setup and configuring of the Leaptronix PLA-2532 Logic Analyzer - Monitoring Logic States of Digital lines

[NEAL SINGH]

Setup and configuring of the Leaptronix PLA-2532 Logic Analyzer – Monitoring Logic States of Digital lines

 

https://sites.google.com/site/leapleaptronixen/ruan-ti-xia-zai/leaptronix-series

 

 

Download and load this sw

 

 

 

There is a Port 1 and Port 2

 

0 – 7 starts with colours Brown, Red, Yellow, Orange, Green etc and each have their own Ground- If its on the same device, then only one ground can be used.

 

 

Now enable each channel that you will be using;

 

 

 

Then Hit Run to see those lines show there state

 

 

 

 

Best Regards

Neal Singh

082 4593467

Ph: 011 615-3437

www.smartfuel.co.za