Download Command 0x1c – Tech Config: Tank Setup

['Neal Singh]

Each Pump Nozzle is assigned to a Tank with a Fuel Grade. From the Grade, the Fuel Price can be gotten  

Download Command 0x1c – Tech Config:  Tank Setup
Field Name				Data
TankCode1, TankID#|TankSize|Reorder Level|FuelType|FuelGrade| ATGType|ATG#| A/B				TANKID# - Some Tanks it could be 5 Ascii characters e.g . 16924	1|16924|23000|5000|1|2|2|1|A
TankCode2,  TankID#|, Size|Reorder Level|FuelType|FuelGrade| ATGType|ATG#| A/B					2|12423|14000|1500|1|1|2|1|A
					A = Above Ground
					B = Below Ground
Below a sample of the comms from the Web to the M/C
STX [1] Hex	SiteID[3] Hex	Packet Type[2] Hex	Payload length [1] Hex	Payload		CRC [1] Hex	ETX  [1] Hex
0x32	0x04FD00D00	0x07	0xnn	T1|16924|23000|5000|1|2|A|2|14000|1500|1|1|A		XX	0x33

The Web will main  these tables below for the Types and Grades

FuelType	Descriptions
0	Not Applicable
1	Diesel
2	Petrol
3	Paraffin
4	Natural Gas
5	etc

 

FuelGrade	Descriptions
0	Not Applicable
1	Diesel 500ppm
2	Diesel 50ppm
3	Diesel 12ppm
4	UL93
5	UL95
6	Etc

[juanchigarin]

In this command, is possible that the TankCode starts in 0 instead of in 1? To match with the array index.

[juanchigarin]

The Parameter Above, Below has other option that is N=Not installed.
It is usefull because not all the fuel stations have the same quantity of tanks but the system is dimensioned by the maximum.
In the field ATG Type:
0 = ATG B-ULM
1= ATG ITALIANA