MID 7.2 DipSwitches Explained Rev 1.03

[NEAL SINGH]

MID 7.2 DipSwitches Explained Rev 1.03

 

Pinout on Dip switch 2
   *  1 MSB UART2 Baudrate (Digital Pumps)
   *  2 MID UART2 Baudrate (Digital Pumps)
   *  3 LSB  UART2 Baudrate (Digital Pumps)
   *  4 ON - Enable Super Poll Mode / OFF – Normal Polling

   *  5 ON - Super Poll Setup Clear / OFF – Super Poll Memory Mode

   *  6 ON - Debug Console Start Message / OFF – Operational Mode

   *  7 ON – Mechanical Pump Mode

   *  8 ON – RFID Mode /OFF - iButton Mode


Uart2 Baudrates (Dipswitch 2)

Sw1-3	Baud Rate	Pump Make
000	1200, 8, E, 1
001	2400, 8, N, 1
010	4800, 8, E, 1	Prowalco
011	4800, 8, N, 1
100	5787, 8, E, 1	Gilbarco
101	9600, 8, N, 1	Tokheim
110	4800, 8, O, 1
111	38400, 8, N, 1